Shaoxing Libo Electric Co., Ltd
Zhejiang Libo Industrial Co.,Ltd. Leading trunk cable manufacturer in China. Expert for leaky feeder cable.
Add to Cart
SCTE Standard CATV Trunk cable 500 Aluminum Tube Trunk Cable Asphalt Floodant Compound
Quick Details:
•Aluminum Tube Trunk Cable500 JCASS
•Seamless aluminum tube as outer conductor
•Patented technology
•Over 20 years of experience
•High quality PE outer jacket
•Asphalt or flooding compound is available
•One of key OEM /ODM trunk cable suppliers in China
•ISO certfied factory
•Conflict Minerals Declaration
Product description:
This is the seamless aluminum tube trunk cable is with outstanding minimum bend radius, product is manufactuered and tested in the factory according ANSI/SCTE standard.
The inner conductor is high quality copper clad aluminum (CCA), dielectric core is produced by insulating grade virgin polyethylene, it is tightly covered by solid aluminum tube. Medium density PE is used as jacket material. Flooded compound is used to prevent corrosion of the trunk cable.
Applications:
The P3 500 JCASS trunk cable is used as main cable and distribution cable for CATV network, such as base station and equipment cabinets. It is applicable in transmission of single and duplex analog signals and as well as duplex digital signals. The trunk cable is also widely used in HFC duplex transmission network.
| Physical dimensions | ||
| component | inches | mm |
| Inner conductor | 0.109 | 2.77 |
| diameter over dielectric | 0.450 | 11.43 |
| diameter over outer conductor | 0.500 | 12.70 |
| Outer conductor thickness | 0.024 | 0.61 |
| Diameter over flooded jacket | 0.570 | 14.48 |
| Jacket wall thickness | 0.030 | 0.76 |
Packing:
Buyer's labels and cartons OEM/ODM desgin service is available.
Mechanical performance:
Minimum bending radius: 6.0 inches/15.2cm
Maximum pulling tension: 300lbs /136kgf
Electrical characteristics:
Capacitance: 15.3±1.0pt/ft.(50±3.0nf/km)
Impedance: 75±2 ohms
Velocity of propagation: 87% nominal
Maximum D.C resistance @68OF:
Inner conductor: 1.35ohms/1000ft (4.43ohms/km)
Outer conductor: 0.37ohms/1000ft (1.21ohms/km)
Loop: 1.72 ohms/1000ft. (5.64 ohms/km)
Attenuation@ 68OF(20oC):
| @Frequency MHZ | dB/100ft. (MAX.) | dB/100 meters(MAX.) |
| 5MHZ | 0.16 | 0.52 |
| 55MHZ | 0.54 | 1.77 |
| 83MHZ | 0.66 | 2.17 |
| 211MHZ | 1.09 | 3.58 |
| 250MHZ | 1.20 | 3.94 |
| 300MHZ | 1.31 | 4.30 |
| 350MHZ | 1.43 | 4.69 |
| 400MHZ | 1.53 | 5.02 |
| 450MHZ | 1.63 | 5.35 |
| 500MHZ | 1.73 | 5.67 |
| 550MHZ | 1.82 | 5.97 |
| 600MHZ | 1.91 | 6.27 |
| 750MHZ | 2.16 | 7.09 |
| 865MHZ | 2.34 | 7.68 |
| 1000MHZ | 2.52 | 8.27 |
Applications:
The P3 500 JCASS trunk cable is used as main cable and distribution cable for CATV network, such as base station and equipment cabinets. It is applicable in transmission of single and duplex analog signals and as well as duplex digital signals. The trunk cable is also widely used in HFC duplex transmission network.
Competitive Advantage:
